Product Description
Working Principle
Working Principle of High Efficiency Mud Desander Hydrocyclone
Desilter Hydrocyclone Mud Cleaner Hydrocyclone:
The feed is introduced under pressure through the trangential entry which imparts a
swirling motion to the pulp. This generates a vortex in the cyclone, with a low pressure
zone along the vertical axis.An air core develops along the axis ,normally connected to
the atmosphere through the apex opening, but in part created by dissolved air coming
out of solution in the zone of low pressure.
Hydroclone have repaled mechanical classifiers in many modern grinding plants,as they
are more efficent, especially in the finer size ranges,they also need less floor space and
consume less power. Due to the relatively short residence time of particles within the
cyclone,the mill circuit can rapidly be brought into balance if any changes are made abd
oxidation of particels within thecircuit is reduced.
Model |
Diameter
(mm) |
Overflow Diameter
(mm) |
Underflow Diameter
(mm) |
Max feeding size
(mm) |
Feeding
Presure
(Mpa) |
Capacity
(m3/h) |
Separating size
(um) |
|
|
|
|
| FX660 |
660 |
180~240 |
80~150 |
16 |
0.03-0.2 |
250~350 |
74-220 |
| FX610 |
610 |
170~220 |
75~120 |
13 |
0.03~0.2 |
200~300 |
74~220 |
| FX500 |
500 |
130~200 |
35~100 |
10 |
0.03~0.3 |
140~220 |
74~200 |
| 74~150 |
| FX350 |
350 |
80~120 |
30~70 |
6 |
0.04~0.3 |
60~100 |
50~150 |
| 50~120 |
| FX300 |
300 |
65~115 |
20~50 |
5 |
0.04~0.3 |
45~85 |
50~150 |
| 40~100 |
| FX250 |
250 |
60~100 |
16~45 |
3 |
0.06~0.35 |
40~60 |
40~100 |
| 40~100 |
| 30~100 |
| FX200 |
200 |
40~65 |
16~32 |
2 |
0.06~0.35 |
25~40 |
40~100 |
| 30~100 |
| 30~100 |
| FX150 |
150 |
30~45 |
8~22 |
1.5 |
0.06~0.35 |
11~20 |
30~74 |
| 30~74 |
| 30~74 |
| FX125 |
125 |
25~40 |
8~18 |
1 |
0.06~0.35 |
8~15 |
20~100 |
| 20~74 |
| FX100 |
100 |
20~40 |
8~18 |
1 |
0.06~0.35 |
5~12 |
20~100 |
| 20~100 |
| 20~100 |
| FX75 |
75 |
15~22 |
6~12 |
0.6 |
0.1~0.4 |
2~5 |
20~74 |
| 5~40 |
| FX50 |
50 |
11~16 |
3~8 |
0.3 |
0.1~0.4 |
1~2 |
10~74 |
| 5~30 |
Shipping and Packaging
Our Services
Pre-sales services
According to the clients requirements, we will offer the several primary plans for our customers.
The clients' visit are always welcome, and we will arrange pick-up and interpreter for customers.
in-Sales service
Our experienced engineer will be available on the phone and Internet all the time.
We can provide installation direction and operating service according to the requirement
of the clients, meanwhile, provide the technical training and service for clients.
After-sales services
Usually, the equipment has 12-month warranty since installation,
but can extend as long as 24 months as the
clients' request. Equipment spares will be offered with the cost price after the warranty.
Warmly welcome you to visit our factory !!!
){kind=link}