| Type: | Spiral Sand Washer |
|---|---|
| Capacity: | 20-30t/h |
| Water Consumption: | 10-80t/h |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier |
Sand Washing Machine |
||
|
Whole Machine Parameter |
Diameter |
8000*2343*1430mm |
|
|
Water Consumption |
6-60t /H |
|
|
Working Capacity |
200-300m³/H |
|
Water Wheel |
Diameter |
508mm |
|
|
Width |
6705mm |
|
|
Row Line Quantity |
4 |
|
Reduction Box |
Main Reduction Box Model |
JZQ850 |
|
|
Transmission |
Chain Transmission |
|
ElectricMotor |
Power |
5.5kw |
The spiral sand washing machine is one of the main equipments of Henan Xingyang Mining Machinery Manufactory.
Over the past decades, with the continuous practice of domestic and foreign markets, the gradual upgrading of ancillary products, the current sand washing equipment has become a mature assembly line equipment of our factory.
The sand washing machine is composed of gears, reducers, brackets, sedimentation tanks, impellers, pulleys, motors and other important parts.
The transmission device:
It is composed of the electric motor, big and small belt pulleys, triangle belt and gear reducer.
Gear reducer:
speed ratio i=68.61, a whole sealing oil bath type. The gear is steel cylinder helical gears. The materials of the gear reducer are HT20-40 with industrial pad liner(δ=0.5mm). The liner is smeared withfluid sealant. The reasonable design of the gear and the gear reducer ensures the accuracy of transmission.
Screw arbor:
Screw diameter D=920mm, Thread pitchS=445mm, HeadZ =1, Cylinder number N=15.5. The materials of screw blade is Q235A, δ=8mm armor plate jointed continuously to the hollow shaft. The screw of each thread pitch iscomposed of six liners. Liner materials are high manganese cast steel (ZGMn13). The screw liner is connected by bolt, nut and screw blade. Hollow shaft is seamless pipe (219X22) which ensures intensity and rigidity. On the both side, jointing ring flange which is connected to lug and under-part bearing respectively. This structure meets the demand of sand to wash, separate, and classify and dehydrate fully.
Trough:
It contains shell, input devices, right weir plates and left weir plates.Trough is steel plate jointed into water tight structure. Right and left weir plates and input devices are connected by bolt, nut, and grower washers. Right weir plate and left weir plate&=3(mm)rubber sheet for sealing. On the bottom of trough, it installs sheet bending machine on one side which keeps a suitable clearance with the out edge of the impeller in order to move particles forward. Another side is gutter used for discharging moisture from sand.
Overflow platecan be adjusted:
upgrade one or two weir plates, can curtail the valid length change the admission velocity of washing water, can increase working head and change overflow speed, getting rid of granule according to the demand of classification. Wire plates can provide compensation when trough's location tilts by the mistakes of assembling and installment.
This sand washer should be installed with an angle of 15 degree,under the water tub, three weir plates form the sediment pool, the screw head is immersed in this pool, the screw is driven by electric motor through reducer rotating continuously, the fresh water is feeding from porous plate at bottom of sediment pool, this machine have three functions of washing, dewatering, classifying.
Washing.
The sand is feeding into the sediment pool from the feeding box, with the help of rotating screw blade, the sand is turning, rolling and grinding each other to eliminate impurity and water-air layer around sand to facilitate de-water. The fresh water rising current from the porous plate carries foreign matter to water surface and overflow the weir plate, to finish washing processing.
De-watering
The sand with bigger density is sunken down to tub bottom, the screw blade push this sand upwards, when passing through upper tub of proper length above water level, the water is draining into sedimentpool from another drainage ditch, the de-watered sand is out from the discharging opening.
Classifying
Material classifying is realized by overflowing the fine particle that does not meet the standard requirements. The controlling method is adjusting height of overflowing weir and adjusting speed of screw.
| Model | XL508 | XL610 | XL762 | XL915 | 2XL915 |
| Spiral Dia (mm) | 508 | 610 | 762 | 915 | 915 |
| Sink Length (mm) | 6705 | 7225 | 7620 | 7585 | 7585 |
| Feeding Size (mm) | ≤10 | ≤10 | ≤10 | ≤10 | ≤10 |
| Capacity (t/h) | 20 | 40-50 | 50-75 | 100 | 200 |
| Spiral Speed (r/min) | 38 | 32 | 26 | 21 | 21 |
| Motor Power (kw) | 5.5 | 7.5 | 11 | 11 | 2*11 |
| Water Consumption (t/h) | 6-60 | 6-63 | 9-63 | 10-80 | 20-160 |
| Dimension (mm) | 8000*2343*1430 | 8000*2050*1400 | 8545*2650*3862 | 8500*2810*3600 | 8420*3765*3960 |
| Weight (t) | 2.67 | 3.80 | 5.23 | 6.27 | 11.11 |
Packaging Detail:Standard containers, bare main machine, motors and small parts are packed in wooden cases.
Delivery Detail:Within 25 days Qingdao,Shanghai,Tianjin and other ports.
Henan Xingyang Mining Machinery Manufactory (in the past is local state-owned enterprises ),the company located in the western of Zhengzhou city,Henan province.Our company was founded in 1956,subsidiary company have Henan Xingyang Mining Machinery CO., LTD, Tibet Branch, Xinxiang casting plant, Xinxiang processing factory.
-Pre-sale services
Based on the clients' request and budget, we will offer equipment pictures, working site videos, plant processing diagram, assemble drawings, foundation drawings, and plant layout. Clients are welcome to visit our factory, also our equipment working site from former clients. We will arrange cars, hotels and translators for the visiting customers.
-Sale services
Our experienced technicians is available on the phone also the internet, clients can get instance guidance by telephone, email, online service anytime, anywhere. As clients' request, we will send technician to the mine site to guide the installation, trial run test, and training operators until the plant works normally.
-after-sale service.
Equipment spares will be offered with manufacturing cost in at least 10 years since the order is placed. To establish long term cooperation, we will regularly call and email our clients, to check the equipment working condition, offer suggestions for maintenance, and if necessary we will pay a visit to clients to solve the problems caused during equipment working.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}