| Customization: | Available |
|---|---|
| Type: | Ball Mill |
| Motor Type: | AC Motor |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Ball mill is a type of grinding equipment that uses the rotary cylinder to bring the grinding medium and materials to a certain height and make them squeeze, impact, and grind and peel each other to grind materials. Ball mill is the key equipment for crushing materials after they are crushed. It is widely used in cement, silicate products, new building materials, refractories, chemical fertilizer, ferrous and nonferrous metals mineral processing, powder metallurgy, glass ceramics, and other production. Dry grinding or wet grinding can be carried out for various ores and other grindable materials. In mine production, as the main production equipment, the operation rate and efficiency of ball mill often determine the production efficiency and indicators of the whole plant.
1.What is a Ball Mill?
A ball mill is a type of grinder used to grind, blend and sometimes for mixing of materials for use in mineral dressing processes, paints, pyrotechnics, ceramics and selective laser sintering. It works on the principle of impact and attrition: size reduction is done by impact as the balls drop from near the top of the shell.
2. How a Ball Mill Works?
In case of continuously operated ball mill, the material to be grind is fed from the left through a 60° cone and the product is discharged through a 30° cone to the right. As the shell rotates, the balls are lifted up on the rising side of the shell and then they cascade down (or drop down on to the feed), from near the top of the shell. In doing so, the solid particles in between the balls and ground are reduced in size by impact.
3. What is application of the Ball Mill?
The ball mill is used for grinding materials such as coal, pigments, and feldspar for pottery. Grinding can be carried out either wet or dry but the former is performed at low speed. Blending of explosives is an example of an application for rubber balls.For systems with multiple components, ball milling has been shown to be effective in increasing solid-state chemical reactivity. Additionally, ball milling has been shown effective for production of amorphous materials.
4. Which are the common types of Grinding Mills?
The Comman Types of Grinding Mills are. 1. Ball Mill. 2. Tube Mill. 3. Rod Mill. 4. Pebble Mill. 5. Batch Mill. 6. Grate Discharge Mill. 7. Trunnion Ovelflow Mill.
5. Which are the key component of a Grinding Mill?
The key components of a Grinding mill are Shell Plate, Feed-End Plate, Discharge-End Plate, Manhole, Gear Box, Mill Liners, Grinding Media etc.
6. Which are the main types of Mill Liner?
The main types of Mill Liners are Solid Steel Liners, Manganese Liner & Rubber Liner.This machine is a horizontal cylindrical rotating device, driven by outer gears, and a two-chamber ball mill. The material enters the mill cabin uniformly through the feeding device through the feeding hollow shaft spirally and uniformly. There is a step liner or a corrugated liner inside the warehouse, which contains steel balls of different specifications. The cylinder rotates to generate centrifugal force to bring the steel balls to a certain height and then fall. , It has a heavy blow and grinding effect on the material. After the material reaches the rough grinding in the first warehouse, it enters the second warehouse through the single-layer partition board. The warehouse is lined with flat liners and steel balls to further grind the materials. The powder is discharged through the unloading grate to complete the grinding operation.
1. Simple structure, no large ring gear, bearing and lubrication system, greatly reducing maintenance costs
2. Short delivery time, low installation cost, minimized use of concrete required
3. The steel structure base is adopted, which is strong and durable
4. There are no ring gears, reduction gears, drums or bearings
5. Ready-made standard components, easy to replace, reduce downtime
6. Wear-resistant truck tires can be purchased locally
7. The discharge method can be customized (overflow discharge or grid discharge)
8. Each section has quality inspection and testing, test run before leaving the factory
9. Rubber lifting plate, long life, easy to replace
10. Easy repair and maintenance
| Model | Cylinder RPM (/min) |
Ball load (t) |
Feeding size (mm) |
Discharging size (mm) |
Capacity (h) |
Motor | Dimension (LxWxH) (mm) |
Weight (t) |
|
| Model | Power(kw) | ||||||||
| MQ G(Y) 600x1800 | 45.5 | 0.5 | ≤ 10 | 0.074-0.5 | 0.2-0.5 | Y160M-6 | 7.5 | 3100x1624x1070 | 2.5 |
| MQ G(Y) 900x1800 | 38 | 18 | ≤ 20 | 0.074-0.6 | 0.8-2 | Y180L-6 | 15 | 4196x2300x1985 | 5.8 |
| MQ G(Y) 900x3000 | 374 | 2.7 | ≤ 20 | 0.074-0.3 | 0.8-3 | Y20012-6 | 22 | 6170x2034x2074 | 7.5 |
| MQ G(Y) 1200x2400 | 32 | 4.8 | ≤ 25 | 0.074-0.6 | 1.5-4 | Y225M-6 | 30 | 6520x2850x2540 | 9.8 |
| MQ G(Y) 1200x4500 | 30 | 5.2 | ≤ 25 | 0.074-o.6 | 1.5-6 | Y2805-6 | 45 | 8820x3070x2630 | 13.2 |
| MQ G(Y) 1300x4000 | 36 | 5.8 | ≤ 25 | 0.074-0.6 | 2-6 | Y280s-8 | 45 | 7661x2720x2100 | 14.8 |
| MQ G(Y) 1500x3500 | 28.8 | 8.3 | ≤ 25 | 0.074-o.6 | 3-6 | YR280M-8 | 90 | 8500x3100x2100 | 17.6 |
| MQ G(Y) 1500x4500 | 28.8 | 10 | ≤ 25 | 0.074-04 | 4-8 | JR125-8 | 95 | 9680x3200x2114 | 22.3 |
| MQ G(Y) 1500x5700 | 28.8 | 12 | ≤ 25 | 0.074-04 | 5-10 | JR126-8 | 110 | 10440x3200x2114 | 26.7 |
| MQ G(Y) 1500x6400 | 28.8 | 13 | ≤ 25 | 0.074-04 | 8-12 | JR127-8 | 130 | 11140x3200x2114 | 29.2 |
| MQ G(Y) 1830x3600 | 24.5 | 12 | ≤ 25 | 0.074-0.4 | 5-10 | JR127-8 | 130 | 7880x4000x3370 | 31.4 |
| MQ G(Y) 1830x5400 | 24.5 | 15 | ≤ 25 | 0.074-04 | 5-20 | JR137-8 | 210 | 9880x4685x3750 | 33.6 |
| MQ G(Y) 1830x6400 | 24.5 | 19 | ≤ 25 | 0.074-0.4 | 6-25 | JR137-8 | 210 | 11710x4685x3750 | 36.5 |
| MQ G(Y) 1830x7000 | 24.5 | 20 | ≤ 25 | 0.074-0.4 | 8-30 | JR138-8 | 245 | 12320x4685x3750 | 39.6 |
| MQ G(Y) 2100x3600 | 24.1 | 21 | ≤ 25 | 0.074-0.6 | 8-20 | YR355L1-8 | 210 | 9016x4510x3720 | 43.2 |
){kind=link}